Por favor, use este identificador para citar o enlazar este ítem:
http://www.repositorio.ufop.br/jspui/handle/123456789/9731
Título : | Hydrometallurgical separation of copper and cobalt from lithium-ion batteries using aqueous two-phase systems. |
Autor : | Leite, Daniela da Silveira Carvalho, Pablo Luis Gutierrez Lemos, Leandro Rodrigues de Mageste, Aparecida Barbosa Rodrigues, Guilherme Dias |
Palabras clave : | Liquid-liquid extraction |
Fecha de publicación : | 2017 |
Citación : | LEITE, D. S. et al. Hydrometallurgical separation of copper and cobalt from lithium-ion batteries using aqueous two-phase systems. Hydrometallurgy, v. 169, p. 245-252, 2017. Disponível em: <http://www.sciencedirect.com/science/article/pii/S0304386X16303644>. Acesso em: 15 set. 2017. |
Resumen : | A new green hydrometallurgical method was developed for the selective extraction of copper and cobalt from spent lithium-ion batteries, using an aqueous two-phase system (ATPS) extraction technique. The method was optimized for the extraction of Cu(II) and Co(II), considering the influence of the following parameters: type and concentration of extractant (1-(2-pyridyl-azo)-2-naphthol (PAN), 1-nitroso-2-naphthol (1N2N), or bis(2,4,4-trimethylpentyl) phosphinic acid (Cyanex 272)); pH (1.00, 6.00, or 11.0); ATPS-forming electrolyte (Na2SO4 or Na3C6H5O7); tie-line length (TLL) of the system; and mass ratio of the top and bottom phases (mTP/mBP). The recovery efficiency was evaluated in terms of the extraction percentage (%E) and the separation factor (S) between copper and cobalt. The best conditions for selective extraction were achieved using an ATPS composed of L64+Na2SO4+H2O,with pH=6.00, TLL=50.3% (w/w),mTP/mBP=1, and PAN as the extracting agent, which resulted in βCu,Co=3.22×102. The method was subsequently applied to a real lithium-ion battery sample, previously leached with HCl and HNO3. Improved separation of copper and cobalt was achieved using successive extraction steps, resulting in βCu,Co=5.40×105. A stripping assaywas also performed, and after a single step, 70.5% of the copper was available for an electrowinning process |
URI : | http://www.repositorio.ufop.br/handle/123456789/9731 |
metadata.dc.identifier.uri2: | http://www.sciencedirect.com/science/article/pii/S0304386X16303644 |
metadata.dc.identifier.doi: | https://doi.org/10.1016/j.hydromet.2017.01.002 |
ISSN : | 0304-386X |
Aparece en las colecciones: | DEQUI - Artigos publicados em periódicos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
ARTIGO_HydrometallurgicalSeparationCopper.pdf Restricted Access | 593,99 kB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.