Please use this identifier to cite or link to this item: http://www.repositorio.ufop.br/jspui/handle/123456789/6764
Title: Avaliação da influência de tratamentos térmicos pós-soldagem sobre a microestrutura e propriedades mecânicas de juntas de um aço API 5L X70Q.
Other Titles: Evaluation of the influence of post welding heat treatments on microstructure and mechanical properties of API 5L X70Q weld joints.
Authors: Araújo, Lívia Carla Silva de
Cândido, Luiz Cláudio
Trindade, Vicente Braz
Porcaro, Rodrigo Rangel
Keywords: Aços ao carbono
Welding metallurgy
Mechanical properties of welded joints
Propriedades mecânicas de juntas soldadas
Aços de baixa liga
Issue Date: 2015
Citation: ARAÚJO, L. C. S. de et al. Avaliação da influência de tratamentos térmicos pós-soldagem sobre a microestrutura e propriedades mecânicas de juntas de um aço API 5L X70Q. Revista Soldagem e Inspeção, v. 20, p. 171-179, 2015. Disponível em: <http://www.scielo.br/scielo.php?script=sci_arttext&pid=S0104-92242015000200171>. Acesso em: 11 jul. 2016.
Abstract: Aços que atendem à norma API 5L são aplicados na construção de dutos e há grande interesse naqueles de maior resistência, como o grau API 5L X70Q. Ainda são escassos os estudos relacionados a tubos sem costura. Durante a montagem, os tubos podem ser soldados por eletrodos revestidos (SMAW) e eventualmente sofrer aquecimento indutivo para adequação à topografia do terreno, processos que podem alterar a microestrutura das juntas. Neste trabalho foram obtidas juntas soldadas pelo processo SMAW, a partir de tubo sem costura grau API 5L X70Q. As juntas foram submetidas a tratamentos térmicos pós-soldagem nas temperaturas 920 °C e 600 °C. Foram realizados ensaios de tração, impacto Charpy e microdureza, além de caracterização metalográfica nas amostras de metal base e nas juntas como soldadas e após os tratamentos térmicos. O tratamento térmico a 920 °C promoveu a formação de estrutura ferrita/perlita, com consequente redução na resistência mecânica das juntas a valores inferiores aos especificados para o grau X70Q. Porém, o tratamento térmico a 600 °C mostrou-se benéfico devido à redução da fração volumétrica dos constituintes martensita/austenita e martensita-austenita-bainita, sem reduzir de forma significativa a resistência mecânica e com relativo ganho na tenacidade ao impacto na ZTA e na ZF.
metadata.dc.description.abstracten: Pipelines for oil and gas conduction are manufactured of steel tubes that meet the API 5L requirements. Currently, much of the research related to the materials used in this industry is target to steels with higher tensile strength such as API 5L X70Q. But studies related to seamless pipes remains rare. During the manufacture of the pipelines, the pipes are usually welded by the SMAW process and may be heated by the inducted bending process to fit the topography of the land, processes that can change the proportion or morphology of the constituents in the heat affected zone (HAZ) and in the fused metal. The present study used an API 5L X70Q seamless steel manufactured by the Mannesmann Process to produce weld joints by the SMAW process. The joints were subjected to post weld heat treatments in the temperatures of 920 °C and 600 °C. Mechanical tests which included tensile test, Charpy impact and microhardness were applied, in addition to microstructure evaluation in the joints as welded and after heat treatments. The results showed that the first heat treatment (920 °C) promoted the formation of structure ferrite/pearlite, which reduced the mechanical properties to values under the specified for materials API grade X70Q. The second heat treatment (600 °C) was feasible in reducing the volume fraction of the Martensite-Austenite and Martensite-Austenite-Bainite constituents, without significant reduction in mechanical strength of the welded joints and with significant gain in impact toughness in the HAZ and in the weld metal.
URI: http://www.repositorio.ufop.br/handle/123456789/6764
metadata.dc.identifier.doi: http://dx.doi.org/10.1590/0104-9224/SI2002.05
ISSN: 1980-6973
metadata.dc.rights.license: Todo o conteúdo da Revista Soldagem & Inspeção, exceto onde identificado, está sob uma licença Creative Commons que permite copiar, distribuir e transmitir o trabalho em qualquer suporte ou formato desde que sejam citados o autor e o licenciante. Não permite o uso para fins comerciais. Fonte: Revista Soldagem & Inspeção <http://www.scielo.br/scielo.php?script=sci_serial&pid=0104-9224&nrm=iso&rep=&lng=pt>. Acesso em: 25 set. 2019.
Appears in Collections:DEMET - Artigos publicados em periódicos

Files in This Item:
File Description SizeFormat 
ARTIGO_AvaliaçãoInfluênciaTratamentos.pdf2,48 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.