Interplay of wettability, interfacial reaction and interfacial thermal conductance in Sn-0.7Cu solder alloy/substrate couples.

Abstract

Directional solidification experiments coupled with mathematical modelling, drop shape analyses and evaluation of the reaction layers were performed for three different types of joints produced with the Sn-0.7 wt.%Cu solder alloy. The association of such findings allowed understanding the mechanisms affecting the heat transfer efficiency between this alloy and substrates of interest. Nickel (Ni) and copper (Cu) were tested since they are considered work piece materials of importance in electronic soldering. Moreover, low carbon steel was tested as a matter of comparison. For each tested case, wetting angles, integrity and nature of the interfaces and transient heat transfer coefficients, ‘h’, were determined. Even though the copper has a thermal conductivity greater than nickel, it is demonstrated that the occurrence of voids at the copper interface during alloy soldering may decrease the heat transfer efficiency, i.e., ‘h’. Oppositely, a more stable and less defective reaction layer was formed for the alloy/nickel couple. This is due to the sup-pression of the undesirable thermal contraction since the hexagonal Cu6Sn5 intermetallics is stable at temperatures below 186C in the presence of nickel.